Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Blink 3: Multiple Color Blinking

Piano
Linkbot Image Mindstorm Image Cursor Image
0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (6 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (18 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in
Blink 3: Multiple Color Blinking
/* Code generated by RoboBlockly v2.1 */
/* Problem Statement: 
    Run the pre-placed blocks, which will blink each LED color
    for one second (red, then green, then blue), with a one
    second delay between them. Then try experimenting with
    different blink and delay times, and with changing the
    order of the colors. Can you add more blinks and patterns
    by dragging and dropping more digitalWrite and
    delay commands from the Arduino block section? 
    */
#include <arduino.h>

pinMode(11, OUTPUT);
pinMode(12, OUTPUT);
pinMode(13, OUTPUT);
digitalWrite(11, HIGH);
delay(1000);
digitalWrite(11, LOW);
delay(1000);
digitalWrite(13, HIGH);
delay(2000);
digitalWrite(13, LOW);
delay(1000);
digitalWrite(12, HIGH);
delay(1000);
digitalWrite(12, LOW);
delay(1000);
digitalWrite(13, HIGH);
digitalWrite(11, HIGH);
delay(2000);
digitalWrite(13, LOW);
digitalWrite(11, LOW);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

Run the pre-placed blocks, which will blink each LED color for one second (red, then green, then blue), with a one second delay between them. Then change the code and add blocks so that it blinks blue for 1 second, red for 2 seconds, green for 1 second, and both red and blue together for 2 seconds, with 1 second between each blink. 


		
Rubbish bin
Time