Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Piano
Linkbot Image Mindstorm Image Cursor Image
0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 10 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in
Multiplication 3x5
/* Code generated by RoboBlockly v2.0 */
/* Problem Statement: 
    Use three of the same blocks or a single block with a
    multiplication operation to move the robot to the green
    line.*/
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

// Run program by clicking "Step"
robot.driveDistance(5, radius);
robot.driveDistance(5, radius);
robot.driveDistance(5, radius);
printf("The robot is at 15. Hence, 3 x 5 = 15");
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 4.45;

// run program by clicking "Step"
robot.driveDistance(3 * 5, radius);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:
Use three identical Drive-Forward blocks to demonstrate 3 x 5 and to drive the robot to the green line. Finally, answer the question prompt.

		
Rubbish bin
Time