Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Piano
Linkbot Image Mindstorm Image Cursor Image
0x2418126-6-12y2418126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in
Modeling Linear Relations 3 in the Coordinate Plane
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

robot.traceColor("red", 4);
robot.setSpeed(3, radius);
robot.driveDistance(16, radius);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

Change the initial position of the robot using the command window in the lower lefthand side (under the Coordinate Plane). Change the initial position of the robot so it starts 8 units to the right and 4 units down. Set the robot’s speed to 3 units per second and then drive the robot to y = 12.


		
Rubbish bin
Time