Learning Math and CS with Robotics
Barobo
Piano
Linkbot Image Mindstorm Image
Grid Lines:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Grid Size: S M L Simple View: MinView:
Background Image
Coord: x-axis y-axis Grid Lines: x-axis y-axis
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
1x1 inches 2x2 inches Fraction:
xy-Range:
Quad: 1 Quadrant 4 Quadrants 1&4 Quadrants
Units: US Customary Metric Ruler:
Label:

Robot 1

0
S
M
L
Initial Position (x, y):
( , ) in
Initial Angle:
degrees
Current Position (x,y) (0, 0) in
Current Angle: 90 degrees
Wheel Radius:

Robot 2

0
S
M
L
Initial Position (x, y):
( , ) in
Initial Angle:
degrees
Current Position (x,y) (0, 6) in
Current Angle: 0 degrees
Wheel Radius:

Robot 3

0
S
M
L
Initial Position (x, y):
( , ) in
Initial Angle:
degrees
Current Position (x,y) (0, 12) in
Current Angle: 0 degrees
Wheel Radius:

Robot 4

0
S
M
L
Initial Position (x, y):
( , ) in
Initial Angle:
degrees
Current Position (x,y) (0, 18) in
Current Angle: 0 degrees
Wheel Radius:
Get the Location and Angle of a Robot and Output to the User

The pre-placed block will change the angle of the robot to 0 degrees relative to the x-axis and output the angle value to the user. Change the blocks so that the outputted angle is 60 degrees. For this to be true, the angle must be 60 degrees relative to the x-axis.

Load Blocks
Hardware
LArduino
Workspace Save File Show Ch Edit Ch Console

		
Rubbish bin
Time