Learning Math and CS with Robotics
Piano
 Grid Lines: Tics Lines: Width px Hash Lines: Width px Labels: Font px Trace Lines: Robot 1: Width px Robot 2: Width px Robot 3: Width px Robot 4: Width px
 Grid Size: S M L Simple View: MinView:
 Coord: x-axis y-axis Grid Lines: x-axis y-axis Grid: 12x12 inches 24x24 inches 36x36 inches 72x72 inches 96x96 inches 192x192 inches 1x1 inches 2x2 inches Fraction: 2 3 4 5 6 7 8 9 10 11 12 xy-Range: xmin xmax xhash xtics ymin ymax yhash ytics Quad: 1 Quadrant 4 Quadrants 1&4 Quadrants Units: US Customary Metric Ruler: Label: x-axis y-axis

#### Robot 1

0
S
M
L
 Initial Position (x, y): ( , ) in Initial Angle: degrees Current Position (x,y) (0, 0) in Current Angle: 90 degrees Wheel Radius: 1.75 in1.625 in2.0 in

#### Robot 2

0
S
M
L
 Initial Position (x, y): ( , ) in Initial Angle: degrees Current Position (x,y) (6, 0) in Current Angle: 90 degrees Wheel Radius: 1.75 in1.625 in2.0 in

#### Robot 3

0
S
M
L
 Initial Position (x, y): ( , ) in Initial Angle: degrees Current Position (x,y) (0, 12) in Current Angle: 0 degrees Wheel Radius: 1.75 in1.625 in2.0 in

#### Robot 4

0
S
M
L
 Initial Position (x, y): ( , ) in Initial Angle: degrees Current Position (x,y) (0, 18) in Current Angle: 0 degrees Wheel Radius: 1.75 in1.625 in2.0 in
Changing the Initial Position and Moving Multiple Robots Simultaneously
 Change the initial position of robot 2 to the position of the dot on the board. Move both robots so that they start moving at the same time and reach the cyan line after 4 seconds.
 Load Blocks Symbol Symbol+Word Word Hardware LArduino Workspace Save File Show Ch Edit Ch Console

Time