Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Arduino LED Module template

Piano
Linkbot Image Mindstorm Image
0x2418126-6-12y2418126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (6 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (18 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in
Arduino LED Module template
/* Code generated by RoboBlockly v2.1 */
/* Problem Statement: 
    Use the Arduino to make the red LED in the Barobo RGB LED
    module blink once by running the pre-placed code blocks,
    which will turn on the red LED, wait one second (using the
    delay command--a millisecond is 1/1000 of a second), and
    then turn it off. Once it is working, can you make a change
    to increase the time that the LED is on?
    */
#include <arduino.h>

pinMode(13, OUTPUT);
digitalWrite(13, HIGH);
delay(2500);
digitalWrite(13, LOW);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

Template


		
Rubbish bin
Time