Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Piano
Linkbot Image Mindstorm Image Cursor Image
0x126-6-12y126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (4 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (8 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in
Apply Integer Addition to Move a Robot
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

robot.traceColor("green", 5);
robot.driveDistance(5, radius);
robot.traceColor("red", 2);
robot.driveDistance(-9, radius);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

Use two driveDistance() blocks to model the problem (5) + (-9) by moving the robot forward to reach the green line and then back to reach the red line. Use two traceColor() blocks to model positive integers in green and negative integers in red.


		
Rubbish bin
Time