Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Piano
Linkbot Image Mindstorm Image
0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 8 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in
Unit of Measurement
/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

robot.driveDistance(7.5, radius);
robot.moveWait();
printf("The pencil is 7.5 inches long");
robot.driveDistance(4.5, radius);
robot.moveWait();
printf("The truck is 12 feet long");
robot.driveDistance(12, radius);
robot.moveWait();
printf("The marathon distance is 24 miles (It's actually 26.2 miles to be exact)");
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:
You're using a robot to measure the length of three objects: a normal #2 pencil, a life-sized truck, and a marathon track. However, the robot can switch units while measuring and only give you numbers as measurement result. It's up to you to figure out which unit of length the robot is using. Run the program and answer the question prompt.

		
Rubbish bin
Time