Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Blink 2: Multiple Blinking with Arduino

Piano
Linkbot Image Mindstorm Image Cursor Image
0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (6 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (18 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in
Blink 2: Multiple Blinking with Arduino
/* Code generated by RoboBlockly v2.1 */
/* Problem Statement: 
    By adding more code blocks like those used in the "Blink 1"
    activity, you can make the LED blink multiple times. Use
    the "Run" button to run the preplaced code and see how it
    works. Do you see how we used an extra delay() block to put
    a delay between the first and second blink? Try changing
    the delay time between the blinks, as well as the lengths
    of the blinks themselves.  
    */
#include <arduino.h>

pinMode(13, OUTPUT);
digitalWrite(13, HIGH);
delay(1000);
digitalWrite(13, LOW);
delay(2000);
digitalWrite(13, HIGH);
delay(1000);
digitalWrite(13, LOW);
delay(2000);
digitalWrite(13, HIGH);
delay(1000);
digitalWrite(13, LOW);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

The pre-placed blocks make the LED blink two times, with a two second delay between the blinks. Add code blocks so that the LED blinks three times for one second each, with two seconds between the blinks. Can you do other variations?


		
Rubbish bin
Time