for Learning Math and Coding
Piano
 Grid: Tics Lines: Width px Hash Lines: Width px Labels: Font px Trace Lines: Robot 1: Width px Robot 2: Width px Robot 3: Width px Robot 4: Width px
 Labels: x-axis y-axis Show Grid Grid: 12x12 inches 24x24 inches 36x36 inches 72x72 inches 96x96 inches 192x192 inches Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants Units: US Customary Metric
 Background:

#### Robot 1

0
S
M
L
 Initial Position: ( in, in) Initial Angle: deg Current Position: (0 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 2

0
S
M
L
 Initial Position: ( in, in) Initial Angle: deg Current Position: (6 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 3

0
S
M
L
 Initial Position: ( in, in) Initial Angle: deg Current Position: (12 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in

#### Robot 4

0
S
M
L
 Initial Position: ( in, in) Initial Angle: deg Current Position: (18 in, 0 in) Current Angle: 90 deg Wheel Radius: 1.75 in1.625 in2.0 in Track Width: in
Geometry in the Coordinate Plane
```/* Code generated by RoboBlockly v2.0 */
double area;
double circumferance;
double trackwidth = 3.69;
int count;

count = 0;
while(count < 36) {
count = count + 1;
}
printf("What is the area of the circle? (rounded to the nearest whole square unit)"+"\n");
scanf("%lf", &area);
printf("What is the circumference of the circle? (rounded to the nearest whole unit)"+"\n");
scanf("%lf", &circumferance);
```
 Load Blocks Symbol Symbol+Word Word Hardware LArduino Workspace Show Ch Save File
Problem Statement:

The preplaced blocks create a circle with a diameter of 10 units. Enter the circumference and area when prompted. Use 3.14 for pi in calculations.

Time