Barobo
PortalSign In
HomeShopTutorialsFree CurriculumHour of Code
RoboBlockly for Learning Math and Coding

Piano
Linkbot Image Mindstorm Image
0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Labels: x-axis y-axis Show Grid
Grid: 12x12 inches 24x24 inches 36x36 inches
72x72 inches 96x96 inches 192x192 inches
Quad: 4 Quadrants 1 Quadrant 1&4 Quadrants
Units: US Customary Metric
Background: Background Image

Robot 1

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 12 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (6 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 3

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (12 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 4

0
S
M
L
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (18 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in
Multiples of 3
/* Code generated by RoboBlockly v2.0 */
/* Problem Statement: 
    Problem Statement	Drive the robot the first 5 multiples of
    3. Each move will represent a multiple then the robot must
    turn right to indicate a new multiple. Three of the five
    multiples listed are correct, you will need to correct two
    driveDistance blocks. */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;
double trackwidth = 3.69;

robot.setSpeed(10, radius);
robot.traceColor("red", 4);
robot.driveDistance(3, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(6, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(9, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(12, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(15, radius);
robot.turnRight(90, radius, trackwidth);
robot.driveDistance(18, radius);
Load Blocks
Hardware
LArduino
Workspace Show Ch Save File
Problem Statement:

Use the robot to draw out the first six multiples of 3 in order from least to greatest, creating a spiral square pattern. The blocks are placed out for you in the Workspace, but the values may or may not be correct. Modify the pre-placed blocks so that each drive-forward distance is a multiple of 3.


		
Rubbish bin
Time